Hobby-Lobby
ALPHA 450 SPORT ARF
Combines the manners of a trainer with all the aerobatic fun The Alpha Sport 450 ARF combines the mild manners of a highwing trainer with all the fun of a sport aerobatic airplane, making it the perfect choice for a few care-free hours at the local park or playground. Constructed from top-quality balsa and plywood, it comes out of the box covered in genuine UltraCote. Assembly takes just an evening or two thanks to features like a bolt-on tail and installed control horns. Alpha 450 Sport ARF Highlights: Assembles in just a few evenings Design based on Hangar 9's Alpha trainer Large magnetic hatch for easy access to electronics Balsa and ply construction Plug-in wings and bolt-on tail Tough aluminum landing gear Steerable nose-wheel Genuine UltraCote® trim scheme Alpha 450 Specs: Wingspan: 48.5 in. (1230mm) Length: 40 in. (1015mm) Wing Area: 395 sq in. (25.5 sq dm) Radio: 4 channels Servos: 4 sub-micro servos Prop Size: APC 10x7E electric prop Speed Control: 25-amp brushless ESC Recommended Battery: 1800 - 2100mAh 3S 11.1V LiPo Technical Specifications: Length: 40" Wingspan: 48.5" Flying Weight: 28 oz. Controls: Ailerons, Elevator, Rudder, Throttle Wing Area: 395 sq. in., ,
Combines the manners of a trainer with all the aerobatic ...HobbyKing
HK MINI-3D GEEBEE LASER CUT KIT 600MM (KIT)
| Wing Span | 600mm |
| Length | 550mm |
| Flying Weight | 210g |
:, Requires:, Your own 4 Channel RX/TX,
A 1st for Hobbyking, a traditional builders kit! This is ...5 Reviews
Hobby-Lobby
PHOENIX R/C PRO SIMULATOR VERSION 3.0 WITH DX5E W/DSMX
,
Phoenix R/C Pro Simulator Version 3.0 with DX5e Grab your ...Hobby-Lobby
ULTRACOTE PEARL BLUE
Hangar 9 UltraCote is a high tech ..." />
| Specs | Length |
| Width | 23.5 in. |
| Weight | 3 oz. per square foot |
,
UltraCote Pearl Blue Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE PARKLITE WHITE
Hangar 9 is bringing its UltraCote® line ..." />
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote Parklite White Hangar 9 is bringing its UltraCote® line ...Hobby-Lobby
ULTRACOTE PARKLITE ORANGE
Hangar 9 is bringing its UltraCote® line ..." />
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Orange Hangar 9 is bringing its UltraCote® line ...Hobby-Lobby
ULTRACOTE PARKLITE OLIVE DRAB
Hangar 9 is bringing its UltraCote® ..." />
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Olive Drab Hangar 9 is bringing its UltraCote® ...Hobby-Lobby
ULTRACOTE PARKLITE DEEP RED
Hangar 9 is bringing its UltraCote® ..." />
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Deep Red Hangar 9 is bringing its UltraCote® ...Hobby-Lobby
ULTRACOTE OLIVE DRAB
Hangar 9 UltraCote is a high tech ..." />
| Length | 6.5 in. (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Olive Drab Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE LITE, TRANS WHITE
Hangar 9 UltraCote is a high ..." />
| Length | 6.5 in. (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Lite, Trans White Hangar 9 UltraCote is a high ...Hobby-Lobby
ULTRACOTE LITE TRANSPARENT CLEAR
Hangar 9 UltraCote is a high ..." />
| Length | 1.98 meters (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Lite Transparent Clear Hangar 9 UltraCote is a high ...Hobby-Lobby
ULTRACOTE LITE SCALE WHITE
Hangar 9 UltraCote is a high ..." />
| Length | 6.5 in. (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Lite Scale White Hangar 9 UltraCote is a high ...Hobby-Lobby
ULTRACOTE LIME GREEN
Hangar 9 UltraCote is a high tech ..." />
| Length | 6.5 in. (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Lime Green Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE FLUOR VIOLET
Hangar 9 UltraCote is a high tech ..." />
| Length | 6.5 in. (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Fluor Violet Hangar 9 UltraCote is a high tech ...Hobby-Lobby
ULTRACOTE FLUOR TRANSPARENT YELLOW
Hangar 9 UltraCote is a high ..." />
| Length | 6.5 in. (78") |
| Width | 23.5 in. |
UltraCote Highlights:, High tech polyester covering, Specs:, Weight:, 3 oz. per square foot,
UltraCote Fluor Transparent Yellow Hangar 9 UltraCote is a high ...